
Thermax B® is an acceptable solution as an economical thermal break for steel framed walls and steel framed roofs.
QuadCore AWP Wall Panel
R 7.15, U-value (W/ m2) 0.14 for 140mm thick 14.8 Kg/ m2 (AU)
Cover width 1m, suggested length 5m
Core Thickness 50mm, 80mm, 100mm, 140mm, 200mm
About 17 Kg/ m2 for 140mm
25 years performance, up to 40 years coating performance (UK warranty)
Core thickness 120, 140 or 150mm = 0.15 to 0.12 U-value (W/m²K) 11.6 to 12.7Kg/sqm (UK) R7.2
Core thickness 200mm = 0.069 U-value (R=12.3)
Spanning capability – Longspan – up to 8.2m, frame to frame
Minimum Serviceability Limit State for 150mm at 5m span cladding – Pressure 2.27 Suction 1.98
BS 8414 tested solution that has passed the requirements of BR 135 and complying with BS EN ISO 9001
Exterior Weather Sheet Substrate to be minimum 0.5mm thick Zincalume AM100/ AM150 coated steel to AS1397. Internal Liner Sheet Substrate to be minimum 0.4mm thick steel coated steel to AS1397.
Kingspan Exterior coating – Spectrum: Consists of a coated semigloss finish with slight granular effect. Black Grey RAL 7021. (Onyx RAL 7016 is Anthracite grey)
Kingspan Interior coating – CLEANsafe 15: The coating has been developed for use as the internal lining of insulated panels. Standard colour is “bright white” with an easily cleaned surface.
Folded corners 600mm each side. Outside Corner – Factory Folded 300mm – 3m

kingspan.com/ca/en-ca/about-kingspan/kingspan-insulated-panels/quadcore


Base “J” Base overhang rather than flush with floor.
Kingspan supplier:
Conqueror PIR Panels – Available in sizes up to 24m
- THICKNESS: 50mm, 75mm, 100mm
- PANEL COVERAGE: 1000mm wide x up to 24m in length
- R VALUE: 2.5, 3.89, 5.15
conquerornz.co.nz/pir-product-range/pir-insulated-external-wall-solutions

MetecnoPanel is a lightweight sandwich panel with a built in PIR fire resistant core.
metalcraftgroup.co.nz/products/metal-insulated-panels/products/metecnopanel-pir
