


10mx10mx3m Aluminium Quad Truss Box System £9,049.00
Joiners – pin truss (global/cosmic truss) or spigot truss (various manufacturers)
Bolts need to be grade 8 rated and meet the size recommended by your manufacturer (probably 5/8″, with a 15/16″ socket). All bolts in a span of truss must face the same direction, and truss uprights need to have the bolts on top, nuts on bottom. When you are tightening the bolts, always wrench down with your ratchet from the nut side, and only turn a few cranks past firm. If you over-tighten your bolts you risk damaging or even breaking them.
If you are using spigot or pin truss, you simply need to get everything lined up and the pins through so that the safety pins can be latched. This may take a gentle touch with a hammer to the pins, but not the truss.

* STATIC LOAD ONLY *
Box Truss 290mm x 290mm
Material: 6082-T6 Aluminium 50x2mm, braces: 20x2mm
Length: 3m (4m max)
Supplied fitted with 4 x conical couplers, 8 x spigots, 8 x Safety Clips (included in the price)
Weight: 18kg
Volume 0.27m3
Australia – JD Sound $600AUD for 3m

Plated bolt connection
The end of plates are connected with bolts and nuts.
Advantages:
- Universal connection system
- Installation length equals truss length
- Robust connection points
- Easy to use nodal elements

Conical connection
Connection with a solid double conical connector which is secured with a conical spigot pin in the ends of the chord tubes and locked with a pin and R clips
Advantages:
- Universal system
- Very quick and simple assembly
- Connection is 100% rigid
- Construction length corresponds to truss length
- Conical spigot pin
- Connection elements are not easily damaged and easy to replace

